Ganzua cerraduras | Double Bit Locks
There are a lot of models of Double Bit Locks around Europe and not only. This is why we decided to offer 3 sticks (Ganzua cerraduras) per your choice with just one handle in a comfortable box on a discounted special price. You receive 3 sticks, 3 small boxes with spare pins for the models you have chosen, one Universal handle, one small tension handle, one graphite, 1 bolt for external pin adjustment and 2 hex keys to manipulate the traction of the pins.
What you get ?
- 3 x Sticks of Double BIT Lock Tools (Ganzua cerraduras )
- 3 small boxes of spare pins for the chosen models
- Universal Handle
- Small tension Handles
- 2 hex keys
- external manipulator
- graphite stick for greasing the tool
- Durable Transport box
Choose 3 sticks!
Double Bit Locks | Ganzua cerraduras | PROEDITION SERIES
Features & Benefits
With these tools you can open no matter how the lock is oriented. All you need is to make sure on which side (frontplane or backplane) the active pins are
EASY MANIPULATION OF THE LOCK
With ProEdition Series you can lift each lever (plate) of the Double Bit Locks to a specific height in order for the locking bolt to move.
EASY TO USE
EASY OPENING PROCEDURE
Similar sticks, similar procedures, different models. If you work with one model, you already know how to work with all models. Easy to use and learn
TRACTION IS THE KEY TO SUCCESS
Key to success – manipulation of the traction of the pins. Easy to do with the two ( 1 spare)hex keys – just untighten it from the handle
REPAIR NEEDED? NO PROBLEM
Easy to assemble and disassemble. Easy to repair any broken pin – just unscrew the top and/or bottom bolts and change the damaged pin.
Make sure you have the correct traction of your pins
The most important thing is the preparation of the stick. On With the external manipulator from the back of the handle you |influence| all pins at the same time. It cannot get any easier
Tools for Double Bit Locks
Cerradura de borjas con ganzua
The first step of the preparation is to ensure the smooth traction of the pins. If you tighten the external manipulator too much, the pins will move very hard. Hence, this may cause very slow or even impossible opening. On the other hand - If you leave them too loose, the pins will move too easy. This can cause the following - during the opening procedure, their movement will be gone. In other words , this will make the opening impossible. The pins must have the correct traction – not too tight nor too loose!
Reviews
There are no reviews yet