Pioneer + Topolino Decoder
Pioneer + Decoder with 6 independent sliding pins is the first locksmith tool from a new series of decoders we will put under the name “Topolino”. This new version of Prodecoder is an innovative new professional locksmith decoder. And we made it specially for Dimple lock Pioneer + with 6 pins . This Pioneer + Decoder works on an automatic self impressioning way. It is very fast and causes no damage on the Pioneer + 6 pins locks.
With Pioneer + Decoder you can read the code. As a result, after you open the lock, you can make a duplicate key. After we ship it, the decoder is ready for work. Because of that, you don’t need to further arrange the tool or any of its components. All you need to do is watch your personalized video and learn carefully the opening procedure. Important factor is the direction of the tension (only to the left as shown in the video) and the tension you are giving. Always keep in mind that this is NOT a force tool.
The tool will “pump” each pin of the Pioneer + to a specific height until it reaches the required depth. Another key point is how easy you can repair any broken or twisted pin – just pull out the broken one and replace it with one of the spare pins provided in your kit.
Contents of the box
- Pioneer + Decoder
- Additional Tension
- 8 spare pins
- reset cap
- reset hex key with code lines
- transportation box
This is a non disruptive opening tool for Pioneer + lock. It must be operated with almost no force. You apply medium amount of tension. The tool will position each of the pins of the Cylinder Lock to a specific height. This happens until it “assumes” the position corresponding to that of the original key. In this way the profile of the key is obtained. At this point you have a complete double bit profile able to open and close the lock exactly like the original key.
Shipping handling information
Before we ship we make a personalized video instructions with your tool. This serves as a manual and also a guarantee for the condition of the decoder. Shipping is done with DHL. Cost of shipping for the EUR is – 30 EUR and 40 EUR for the rest of the world
Disclaimer
This product page aims to illustrate the mechanism and the correct operation of the product offered by Alegro Prodecoder Ltd. The product in this webpage is offered by Alegro Prodecoder Ltd. and it is original and all rights are reserved. All other parts of goods and/or items that can possibly be seen in this page are of an indicative nature and do not represent the subject of this page. They are NOT intended to be exhibited to the public or to be related in any way to the specific product offered and shown in this page!
Reviews
There are no reviews yet