Prodecoder HU100 Opel and Chevrolet

477 $

Prodecoder HU100 can open and decode lock profile HU100 for Opel and Chevrolet

It can be used on the ignition after unlocking or you can use it DIRECTLY on the ignition!

The decoding procedure after unlocking can be performed quite easily and duplicate keys can be made out of it.

It opens the following models:

Vauxhall 
– Agila
– Astra (2004 onwards)
– Combo Van (2004 onwards)
– Corsa (2002 onwards)
– Meriva (2004 onwards)
– Sintra
– Tigra (2004 onwards)
– Vectra (from 2006)
– Zafira (from 2004)

-Insignia from 2008 onwards

Holden 
– Astra (from 2004)
– Barina (2004 onwards)
– Combo (from 2004)
– Tigra (from 2005)
– Zafira (2006 onwards)
– Vectra (2006 onwards)
– Most models 2006 onwards

-Insignia from 2008 onwards

BUICK 
– Allure (from 2009)
– Lacrosse (from 2009)

Cadillac
– Various models from 2007

General Motors 
– Terrain (from 2010)

Chevrolet 
– Camero (2009 onwards)
– Equinox (2010 onwards)
– Cruze (2007 onwards)

Saturn 
– Astra (2008 onwards)

Saab
– 93 (2008 onwards)
– 95 (2008 onwards)

BELOW ARE THE INSTRUCTIONS FOR PRODECODER HU100

Description

Prodecoder HU100 is a mechanical tool that opens very fast lock type HU100. You can work straight on the ignition or on the door lock. In order to be successful with the opening, a specific procedure must be followed. Below in this description you will find General Video Instructions that show step by step the opening methodology. One of the greatest challenges that every user faces is how to determine the wrong side of insertions from the right side of insertion.

  • The Prodecoder HU100 has been tested on over 90 locks of different types before launching it on the market. It is strong, very compact, easy to use and very easy to learn.
  • No tester key is needed as the decoder’s gate pops out when inserted in the wrong direction. This makes the procedure even easier.
  • When the decoder is used according to the instructions, this can become an indispensable tool for every professional locksmith not only in the opening, but also in the decoding. After decoded, the user can make a duplicate key.
  • Very easy to learn. Extremely durable.
  • We test every tool for possible manufacturing mistakes.
  • After your order is completed and the tool is dispatched (within 1-2 days usually) on your email you will receive a link with Video manual of the exact instrument (with a Serial number) you are going to purchase –  This serves as a guarantee that the tool is working.

Instruction Video for Prodecoder HU100

Always apply WD40 before inserting the decoders in the locks. WD-40 loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts. With WD-40 you help the pins move inside the lock cylinder – this leads to better performance.

Step 1. Reset Procedure of Prodecoder:

  • 1. turn the turbo wheel to the right / back one with serial number /
  • 2. close the gate wheel by pushing it in 
  • 3. reset the 8 pins by pushing them down to the maximum through the 4 holes on first side and 4 holes on the second side (8 holes in total)  as shown in the picture below

Prodecoder HU100 reset pins

  • 5. all pins must be aligned, as the picture below

Prodecoder HU100 pins aligned

Now your Prodecoder is ready for the lock opening.

HU100 main components

Step 2. Inserting Prodecoder into the lock

  1. Close the gate wheel / push it in /
  2. Turn the turbo wheel to the right
  3. Put the decoder inside the lock with a closed gate, and holding the gate wheel fully closed

Step 3. Right Side or Wrong Side?

  1. Insert the decoder fully inside the lock.
  2. Push the back Turbo wheel
  3. If the Gate wheel pops out (watch the video) it is on the wrong side
  4. If the Gate wheel does not pop out, you are on the correct side

Step 4. Opening procedure

  1. Make sure you have inserted the tool on the correct side
  2. The most important part is how strong your tension is (on the tension wheel). If its too weak – the lock won’t open or it will open very slow. If the tension is too strong – you may break the tool or risk of tool deformation.
  3. Turn the tension wheel to the LEFT (keep holding it) and then turn the turbo wheel to the left until you reach the 1st stop point (we have 1 2 3 4 stop points engraved on the the gate) and return the turbo wheel to the right in its original position.
  4. Turn the tension wheel to the RIGHT (keep holding it) and then turn the turbo wheel to the left until you reach the 1st stop point (we have 1 2 3 4 stop points engraved on the the gate) and return the turbo wheel to the right in its original position.
  5. Repeat this procedure 15-50 times on stop point 1, 15-20 on stop point 2 and 15-20 times of stop point 3 and on point 4. This is what we call “progressive opening”. Do not rush the tool, the point here is not to reach point 3.
  6. When the prodecoder is turned to the opening position, stay in this position and turn the turbo wheel to the stop point on the gate wheel (the opening point)
  7. Juggle a little bit
  8. Turn to the other side

 

Summary
product image
Author Rating
1star1star1star1star1star
Aggregate Rating
1 based on 5 votes
Brand Name
Prodecoder
Product Name
Prodecoder HU100
Price
EUR 420
Product Availability
Available in Stock

Additional information

Weight 0.250 kg

Reviews

There are no reviews yet.

Be the first to review “Prodecoder HU100 Opel and Chevrolet”

Your email address will not be published. Required fields are marked *

0
0
0
0

Start typing and press Enter to search

Currency exchange rate ONLY for your reference
Prodecoder HU101 - locksmith tool for auto lock opening of locks type HU101 - Ford, Rover, Jaguar, VolvoProdecoder HU83 - locksmith tool for auto lock opening of locks type HU83
WhatsApp WhatsApp us