Prodecoder HU101 Rover Ford Volvo Jaguar


When the key is absent, Prodecoder allows the operator to open and decode with high-speed lock type HU101, without the need for technical training and/or the use of complex locksmith techniques or kits.

Important!!! – there is a new lock with 9 wafers – this decoder does not work on this type of lock. If the pins do not move no matter how you insert the decoder, it’s almost certain that this is 9 wafers lock!

In the description below you will find brief instructions and Videos

Prodecoder HU101 Car Models


  • Fiesta (2008 onwards)
  • Focus (2004 onwards)
  • Focus C Max (2003 onwards)
  • Galaxy (2006 onwards)
  • Kuga (2008 onwards)
  • 3008 from 2009 onwards
  • Mondeo (2007 onwards)
  • S Max (2006 onwards)
  • Transit (2015 onwards)


  • Discovery (2006 onwards)
  • Range Rover (2005 onwards)


  • XK (X150) emergency key (2006 onwards)
  • Most models after 2007


  • S40 (2004 onwards)
  • V50 (2010 onwards)


  • Fiesta (2010 onwards)


  • FALCON FG (2008 onwards)
  • FALCON BF(2005 - 2008)
  • Territory (2005 onwards)

Prodecoder HU101 About

Prodecoder HU101 is a mechanical professional tool that can open very fast lock type HU101 for Ford, Rover, Jaguar and VolVo. In order to be successful with the opening, you must follow a specific procedure. Below in this description you will find General Video Instructions that show step by step the opening methodology. Additionally, one of the greatest challenges that every user faces is how to determine the wrong side of insertions from the right side of insertion.

Prodecoder HU101 - few things to remember

Check the correct positioning- as this is a mechanical tool and not a key, it has a correct side and a wrong side. In the video below you can see how to determine the correct side- it is really easy! When you use the decoder according to the instructions, it can can become an indispensable tool for every professional locksmith not only in the opening, but also in the decoding. After you decode the lock, you can make a duplicate key. You do not need a Tester Key!

WD-40? Yes, it is important

Always apply WD40 before inserting the decoders in the locks. WD-40 loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts. With WD-40 you help the pins move inside the lock cylinder - this leads to better performance.

Three main wheels, easy to remember

Step 1. Reset Procedure of Prodecoder HU101

1. turn the turbo wheel to the right / back one with serial number / 2. close the gate wheel by pushing it in 3. reset the pins by pushing them down to the maximum through the 6 holes on first side and 4 holes on the second side (10 holes in total) as shown in the picture below
4. all pins must be aligned, as the picture below
5. Now your Prodecoder is ready for the lock opening

reset procedure prodecoder hu101

Step 2. Inserting Prodecoder into the lock

1.Close the gate wheel / push it in / 2.Turn the turbo wheel to the right 3.Put the decoder inside the lock with a closed gate, and holding the gate wheel fully closed

Step 3. Opening procedure​

The most important part is how strong your tension is (on the tension wheel). If it’s too weak – the lock won’t open or it will open very slow. If the tension is too strong – you may break the tool or risk of tool deformation. 

Turn the tension wheel to the LEFT (keep holding it). Than turn the turbo wheel to the left until you reach the 1st stop point (we have 1 2 3 4 stop points engraved on the the gate) and return the turbo wheel to the right in its original position. After that you turn the tension wheel to the RIGHT (keep holding it) and then turn the turbo wheel to the left until you reach the 1st stop point (we have 1 2 3 4 stop points engraved on the the gate) and return the turbo wheel to the right in its original position. Repeat this procedure 15-20 times on stop point 1, 15-20 on stop point 2 and 15-20 times of stop point 3 and on point 4. This is what we call “progressive opening”. 

Do not rush the tool, the point here is not to reach point 3. When the prodecoder is turned to the opening position, stay in this position and turn the turbo wheel to the stop point on the gate wheel (the opening point). Juggle a little bit Turn to the other side

Important! Right Side or Wrong Side?

When you start the Opening procedure discussed above, but there is no resistance in the Turbo wheel, this means that you are on the Wrong side and you must eject the tool and reverse it on the other side.

Video instructions for Prodecoder HU101

General info HU101​

HU101 is one of the most difficult locks in terms of unlocking and decoding. It can be found on Ford, Rover, Volvo and Jaguar. It has 10 spaces and 5 depths. Depth 5 is the deepest cut and depth 1 is the shallowest cut. 

When key is absent, Prodecoder allows the operator to open and decode with high speed lock type HU101, without the need for technical training and / or the use of complex locksmith techniques or kits, which would delay the process of opening and that would lead to additional technical difficulties, such as destroying the lock, the door, the window or other part of the car itself. After opening the lock, Prodecoder can decode the lock type HU101. 

Additionally, the greatest advantage of Prodecoder is that it can identify and it can “adjust” to the different height of each of the 10 spaces completely. This facilitates the production of a duplicate key with a very high degree of precision, which is almost impossible in the absence of the original key or with another method of car emergency opening.

Weight0.250 kg


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

WhatsApp WhatsApp us

We use cookies to ensure that we give you the best experience on our website. Click here for more information.

Ivaylov Decoder is FAKE! It is NOT Prodecoder!