When the decoder is used according to the instructions, this can become an indispensable tool for every professional locksmith not only in the opening, but also in the decoding. After decoded, the user can make a duplicate key. Very easy to learn. Extremely durable. Prodecoder HY22 is a mechanical tool that opens very fast lock type HY22 for Kia and Hyundai. In order to be successful with the opening, a specific procedure must be followed.
Below in this description you will find General Video Instructions that show step by step the opening methodology. One of the greatest challenges that every user faces is how to determine the wrong side of insertions from the right side of insertion.
Check the correct positioning- as this is a mechanical tool and not a key, it has a correct side and a wrong side. in the video below you can see how to determine the correct side- it is really easy!
KIA models with lock HY22
HYUNDAI models with lock HY22
WD-40? Yes, it is important
Always apply WD40 before inserting the decoders in the locks. WD-40 loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts. With WD-40 you help the pins move inside the lock cylinder - this leads to better performance
Step 1. Reset Procedure of Prodecoder HY22
Prodecoder HY22 has three active wheels – the turbo wheel, the gate and the tension wheel.
- Step 1 turn the turbo wheel to the right / the back one that contains the serial number on it/
- Step 2 Close the Gate /middle wheel/
- Step 3 reset the pins by pushing them down to the maximum through the 6 holes per side (12 holes in total)
Step 2. Inserting Prodecoder into the lock
Step 1. Turn the turbo wheel all to the right
Step 2. Gently with a shaky movement insert the decoder inside the lock . Please watch the video!
Step 3. Opening procedure
The most important part is how strong your tension is (on the tension wheel). If its too weak – the lock won’t open or it will open very slow. If the tension is too strong – you may break the tool or risk of tool deformation.
1. Start turning the turbo wheel to the LEFT until the second indicator reaches the starting point engraved on the Gate wheel.
2. Turn the tension wheel to the RIGHT (keep holding it) and then turn the turbo wheel to the left until it stops. Keep holding the tension wheel and return the turbo wheel all the way to the right. You keep the tension wheel !. Then return the turbo wheel in the starting position and release the tension.
3. Next Turn the tension wheel to the LEFT (keep holding it) and again turn the turbo wheel to the left until it stops. Keep holding the tension wheel and return the turbo wheel all the way to the right. You keep the tension wheel.. Then return the turbo wheel in the starting position and release the tension.
Repeat this procedure 15-20 times . Do not rush the tool!
After a successful opening, turn the turbo wheel fully to the right, tean a bit to the left, close the gate and again turn the turbo wheel all the way to the right. Gently extract the tool with a shaky movement!
Video Instructions for Prodecoder HY22
Important! Right Side or Wrong Side?
When you start the Opening procedure discussed above, but there is no resistance in the Turbo wheel, this means that you are on the Wrong side and you must eject the tool and reverse it on the other side.