Decoder Topolino for lock model STS 5 pin

STS Decoder Decoder Topolino

The Tecon TC6 TOPOLINO is a manual, self-impressioning decoder specifically engineered to open and decode STS cylinder locks commonly installed on vending machines and elevators. Moreover, its design and dimensions match this cylinder model exactly, and the pick uses a blade with five precision pins arranged in the precise order required for the lock — see the product video for details.

Important — Use Restriction:
Use this tool only with the STS cylinder listed here. In addition, do not apply it to other cylinder types.

Furthermore, the pick assembly relies on fixed bolts, so do not tighten, loosen, or tamper with them. Any such adjustment will permanently damage the tool’s opening and decoding performance.

For licensed locksmiths and authorized professional use only

Contents of the box

Topolino decoder- Important

1 step. Reset the pins – insert the reset cap. The arrow on the Topolino and The arrow of the reset cap must “meet”

2 step. Slide back the button (towards the end of the handle) IMPORTANT! – if the button is not slided back and you try to reset, the tool will be damaged.

3 step. Push all 6 pins with the hex key

4 step. Extract the reset cap. Check if all pins are aligned horizontally

5 step. Slide up the button (towards the top of the blade)

6 step. Insert the additional tension tool first (as shown in the video)

7 step. Insert the tool into the lock with the button pointing the ground

8 step. Slide back the button

9 step. Start pumping – push the tension tool down and then apply tension to the left with the Topolino handle. Return the Topolino handle in neutral position. After that you repeat the procedure, but you lift the tension tool up and then apply tension to the left with the Topolino handle. This procedure must be performed Slide up the button (towards the top of the blade) – there is no need for great tension as you can see in the video!

10 step. Slide down the button (towards the handle). Extract the tool and the tension tool

Demo Video Topolino STS Decoder

Topolino - Additional Information

This is a non disruptive opening tool Tecon TC6 for a specific lock. It must be operated with almost no force. You apply medium amount of tension. The tool will position each of the pins of the Cylinder Lock to a specific height. This happens until it “assumes” the position corresponding to that of the original key. In this way the profile of the key is obtained. At this point you have a complete double bit profile able to open and close the lock exactly like the original key.

Shipping handling information

Before we ship we make a personalized video instructions with your tool. This serves as a manual and also a guarantee for the condition of the decoder. Shipping is done with DHL. Cost of shipping for the EUR is – 30 EUR and 40 EUR for the rest of the world