English
Italian
Spanish
Russian
Ukrainian
Polish
Portuguese
French
German
Greek
Croatian
Hungarian
Albanian
Arabic
Czech
Romanian
Serbian
Slovenian
Slovak
Turkish
Double bit lock Dividers
If you need to change the dividers, here you can buy as many as you want to. They are very easy to set.
What you get with this products
- Divider/s for your ProEdition Stick
- Small transportation box
Choose your
Make sure you have the correct traction of your pins
The most important thing is the preparation of the stick. On most models there are two bolts – one positioned on the top and another on the bottom of the stick. There are two hex keys in the box – one for the top bolt of the stick and one for the bottom bolt.
Tools for Double Bit Locks
Cerradura de borjas con ganzua
The first step of the preparation is to ensure the smooth traction of the pins. If you tighten the bolts too much, the pins will move very hard. Hence, this may cause very slow or even impossible opening. On the other hand - If you leave them too loose, the pins will move too easy. This can cause the following - during the opening procedure, their movement will be gone. In other words , this will make the opening impossible. The pins must have the correct traction – not too tight nor too loose!
WhatsApp us
Anonymous (verified owner) –
Necessary spare pin dividers in case you will break or loose any.I asked Prodecoders only a few spare dividers.Cost:very few euros.I had a reply very quickly as if it was an order of lot of euros.Prodecoders after sales service is perfect.They care for you.