SECUREMME SECURMAP DECODER Prodecoder Automatic

SECUREMME SECURMAP DECODER Prodecoder Automatic works on self impressioning method of opening. In other words this is a non-destructive, covert method of creating a working key for a lock without picking or disassembly. Extremely easy to work with it. The tool can overcome locks that are considered high class. Such locks can be mount on armored doors all around the world. No matter how the lock is oriented, you can unlock and decode as many times as you need to.

The Prodecoder Automatic SECUREMME SECURMAP DECODER kit includes:

Prodecoder Automatic Securemme Securmap
Bulge Remover
2 small tension handles
Reset tool
Spare pins (box with 6 spare pins)
Durable Transportation box

The tool comes with video instructions made with the Prodecoder Automatic that you will receive, with unique serial number. This works as a guarantee that the decoder comes in working condition, and also insures personal attention to every client. If you have any questions or concerns, do not hesitate to contact us at info@prodecoders.com

Remove the "Bulge"

The first step of the opening is to remove the "bulge" . This bulge stands on the entrance of the lock hole. With the help of the Bulge Eraser this happens quite fast and really easy. You just insert the tool in the correct position and depth. After that you just start turning it until both bulges are removed. You remove both the front plane and the back plane. After this procedure is done the bulge is gone (on both front and back planes). But the plates of the lock remain untouched. This leaves it in the exact same condition - brand new. Please note that with Prodecoder Automatic we perform ONLY non-disruptive opening

Prodecoder Automatic Components

Prodecoder Automatic has 2 main wheels and 2 additional small tension handles:

– Turbo wheel – when you turn the turbo wheel you cause movement of the pins. This is the main operational wheel.

– Tension wheel – by giving tension to the left and then to the right, and by holding this tension while we are turning the turbo wheeL. This cause traction between the pins and the respective plates (levers) of the lock. This is the main methodology Prodecoder Automatic uses to work on the self impressioning method. The wheel has two stop points to remind the operator that a progressive opening must be performed.

– Small tension handles- these two can be easily screwed on the Tension wheel (2). Their purpose is for convenience. With them the operation is much easier as they have amazing grip with your hand and you are able to feel the tension of the levers.

Reset the tool

Prodecoder Automatic has very simple reset procedure we must perform before every opening: Turn the Turbo wheel all the way to the RIGHT. That way you put the pins in their correct position With the Reset tool in the box, reset all pins through the 3 + 3 small holes . They are on the 2 cassettes. These holes correspond to the pins and they must be put in zero position. The decoder is ready and you can insert it inside the lock and the opening procedure may begin