Prodecoder HU101 Rover Ford Volvo Jaguar

420 

When key is absent, Prodecoder allows the operator to open and decode with high speed lock type HU101, without the need for technical training and / or the use of complex locksmith techniques or kits.

The locksmith decoder works of the following models:

Ford
– Fiesta (2008 onwards)
– Focus (2004 onwards)
– Focus C Max (2003 onwards)
– Galaxy (from 2006)
– KUGA (2008 onwards)
– Mondeo (2007 onwards)
– S max (2006 onwards)
– Transit (2015 onwards)

Land Rover
– Discovery (2006 onwards)
– Range Rover (2005 onwards)

Jaguar
– XK (X150) emergency key (2006 onwards)
– Most models after 2007

Volvo
– S40 (from 2004)
V50 (from 2004)

Ford USA
– Fiesta (2010 onwards)

Ford Australia
– Falcon FG (2008 onwards)
– Falcon BF (2005 to 2008)
– Focus (2005 onwards)
– Territory (2005 onwards)

Ford Suda Afrika
– Mondeo (2007 onwards)

In the description below you will find brief instructions

Description

  • Prodecoder HU101 is a mechanical tool that opens very fast lock typeHU101 for FGord, Rover, Jaguar and Volco. In order to be successful with the opening, a specific procedure must be followed. Below in this description you will find General Video Instructions that show step by step the opening methodology. One of the greatest challenges that every user faces is how to determine the wrong side of insertions from the right side of insertion.
  1. Check the correct positioning- as this is a mechanical tool and not a key, it has a correct side and a wrong side. in the video below you can see how to determine the correct side- it is really easy!
  • When the decoder is used according to the instructions, this can become an indispensable tool for every professional locksmith not only in the opening, but also in the decoding. After decoded, the user can make a duplicate key.
  • Very easy to learn. Extremely durable.
  • We test every tool for possible manufacturing mistakes.
  • After your order is completed and the tool is dispatched (within 1-2 days usually) on your email you will receive a link with Video manual of the exact instrument (with a Serial number) you are going to purchase –  This serves as a guarantee that the tool is working.

Instruction Video for Prodecoder HU101 Ford, Rover, Volvo and Jaguar

Always apply WD40 before inserting the decoders in the locks. WD-40 loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts. With WD-40 you help the pins move inside the lock cylinder – this leads to better performance.

Step 1. Reset Procedure of Prodecoder:

  • 1. turn the turbo wheel to the right / back one with serial number /
  • 2. close the gate wheel by pushing it in 
  • 3. reset the pins by pushing them down to the maximum through the 6 holes on first side and 4 holes on the second side (10 holes in total)  as shown in the picture below

reset procedure prodecoder hu101

  • 5. all pins must be aligned, as the picture below

Now your Prodecoder is ready for the lock opening.

Prodecoder hu101 main components

Step 2. Inserting Prodecoder into the lock

  1. Close the gate wheel / push it in /
  2. Turn the turbo wheel to the right
  3. Put the decoder inside the lock with a closed gate, and holding the gate wheel fully closed

Step 3. Opening procedure

  1. The most important part is how strong your tension is (on the tension wheel). If its too weak – the lock won’t open or it will open very slow. If the tension is too strong – you may break the tool or risk of tool deformation.
  2. Turn the tension wheel to the LEFT (keep holding it) and then turn the turbo wheel to the left until you reach the 1st stop point (we have 1 2 3 4 stop points engraved on the the gate) and return the turbo wheel to the right in its original position.
  3. Turn the tension wheel to the RIGHT (keep holding it) and then turn the turbo wheel to the left until you reach the 1st stop point (we have 1 2 3 4 stop points engraved on the the gate) and return the turbo wheel to the right in its original position.
  4. Repeat this procedure 15-50 times on stop point 1, 15-20 on stop point 2 and 15-20 times of stop point 3 and on point 4. This is what we call “progressive opening”. Do not rush the tool, the point here is not to reach point 3.
  5. When the prodecoder is turned to the opening position, stay in this position and turn the turbo wheel to the stop point on the gate wheel (the opening point)
  6. Juggle a little bit
  7. Turn to the other side

Step 3. Right Side or Wrong Side?

  1. When you start the Opening procedure discussed above, but there is no resistance in the Turbo wheel, this means that you are on the Wrong side and you must eject the tool and reverse it on the other side.

HU101 is one of the most difficult locks in terms of unlocking and decoding. It can be found on Ford, Rover, Volvo and Jaguar. It has 10 spaces and 5 depths. Depth 5 is the deepest cut and depth 1 is the shallowest cut.

When key is absent, Prodecoder allows the operator to open and decode with high speed lock type HU101, without the need for technical training and / or the use of complex locksmith techniques or kits, which would delay the process of opening and  that would lead to additional technical difficulties, such as destroying the lock, the door, the window or other part of the car itself.

After opening the lock, Prodecoder can decode the lock type HU101. The greatest advantage of Prodecoder is that it can identify and it can “adjust” to the different height of each of the 10 spaces completely. This facilitates the production of a duplicate key with a very high degree of precision, which is almost impossible in the absence of the original key or with another method of car emergency opening.

We deliver safe with DHL Express all over the world, so you can track where your product is.

Every product is tested manually on several locks to ensure the good quality and condition of your purchase.

  • On your email you will receive a link with Video manual of the exact instrument (with a Serial number) you are going to purchase-  This serves as a guarantee that the tool is working.

 

 

Summary
product image
Author Rating
1star1star1star1star1star
Aggregate Rating
3 based on 9 votes
Brand Name
Prodecoder
Product Name
Prodecoder HU101
Price
EUR 420
Product Availability
Available in Stock

Additional information

Weight 0.250 kg

Reviews

There are no reviews yet.

Be the first to review “Prodecoder HU101 Rover Ford Volvo Jaguar”

Your email address will not be published. Required fields are marked *

0
0
0
0

Start typing and press Enter to search

Currency exchange rate ONLY for your reference
ProdecoderProdecoder HU100 - locksmith tool for auto lock opening of locks type HU100 -Opel and Chevrolet
WhatsApp WhatsApp us